| Availability |
SKU |
Description |
Price |
|
| | REEL DISCONTINUED BY PENN
Many of these parts will become unavailable in the future.
Click above for more info
| |
|
| SCHEMATIC | 500S Schematic & Parts List
| |
|
| | 500 and 500S Design Change - Bridges/Sleeves/Star Drag Info
| |
|
| 1-500S - Limit (1) | 1-500S Plate, Handle Side Plate (Red)
LIMITED QUANTITIES AVAILABLE | $25.00 |
|
| 2-500S - Not Available | 2-500S Ring, Handle Side Inner Ring
REPLACED BY PART NUMBER 28-250 | |
|
| 3-500 | 3-500 Bridge with Sleeve (COARSE TOOTH f/older reel)
| $17.10 |
|
| 3-500S | 3-500S Bridge with Sleeve (FINE TOOTH)
| $16.30 |
|
| 4-60 | 4-60 Washer, Hard Fiber Spacer (Under Main Gear)
| $0.75 |
|
| 5-500 - Limit (5) | 5-500 Gear, Main Gear
LIMITED QUANTITIES AVAILABLE | $10.45 |
|
| 6-309 | 6-309 Washer, Drag, HT-100®
MULTI USE See Description
| $1.25 |
|
| 6-309SP - Limit (10) | 6-309SP Kit, Drag Washers HT-100® with Metals
LIMITED QUANTITIES AVAILABLE | $6.30 |
|
| 7C-500 | 7C-500 Washer, Drag, Metal Drag Washers (SET of 3)
See design change notes | $4.75 |
|
| 7-500 | 7-500 Washer, Drag, Metal Drag Washer, Earred
| $1.05 |
|
| 8-60 | 8-60 Washer, Tension Spring Washer (Belleville)
| |
|
| 9-60 | 9-60 Sleeve, Spacing Sleeve - (optional variations)
Variations allow for more/less play in handle - see description. | $1.75 |
|
| 10-60 | 10-60 Star Drag Wheel (COARSE TOOTH)
| $3.35 |
|
| 10-505 | 10-505 Star Drag Wheel (FINE TOOTH Thread - Two Types)
Click to read more about the two types of 10-505 stars | $4.20 |
|
| 11-99 | 11-99 Jack, Eccentric Jack
| $1.35 |
|
| 12-500 | 12-500 Yoke, Pinion Yoke
REPLACES ORIGINAL PART NUMBER 12-99 ON SOME REELS | $2.45 |
|
| 13-500 - Limit (10) | 13-500 Gear, Pinion Gear
LIMITED QUANTITIES AVAILABLE | $12.60 |
|
| 14-500 | 14-500 Spring, Dog Spring, Coil
MULTI USE See Description | $0.70 |
|
| 15-500 | 15-500 Dog
| $1.05 |
|
| 16-60CH | 16-60CH Screw, Bridge, Lower Bridge Screw
REPLACES ORIGINAL PART NUMBER 16-60 ON SOME REELS | $0.55 |
|
| 17-60CH | 17-60CH Screw, Bridge, Upper Bridge Screw
REPLACES ORIGINAL PART NUMBER 17-60 | $0.55 |
|
| 18-60 | 18-60 Spring, Clutch Spring
| $0.55 |
|
| 19-250 | 19-250 Eccentric
REPLACES ORIGINAL PART NUMBER 19-99 | $2.65 |
|
| 20-60L | 20-60L Spring, Eccentric Spring
| $0.70 |
|
| 21-66 | 21-66 Lever, Eccentric Lever
REPLACES ORIGINAL NUMBER 21-125 ON SOME REELS | $2.15 |
|
| 22-99 | 22-99 Screw, Eccentric Screw
| $1.60 |
|
| 23-60 | 23-60 Screw, Large
MULTI USE See Description | $2.65 |
|
| 24-66 | 24-66 Handle, Rubberized Knob
| $18.40 |
|
| 26-155 | 26-155 Bearing, Handle Side Ring
| $3.35 |
|
| 27-500S - Not Available | 27-500S Plate, Non-Handle Side Plate (Red)
| |
|
| 28-250 | 28-250 Side Ring
MULTI USE See Description
| $6.85 |
|
| 28-500S | 28-500S Ring, Non-Handle Side, Inner
| |
|
| 28i-500S - Not Available | 28i-500S Ring, Non-Handle Side Ring, with Quick Release Slots
| |
|
| 29L-500 | 29L-500 Spool, Aluminum (Black)
| $27.60 |
|
| 29M-250 - Not Available | 29M-250 Spool, Chrome on Bronze
| |
|
| 29P-500A - Limit (1) | 29P-500A Spool, Plastic
| $40.35 |
|
| 30-200 | 30-200 Stand
| $8.95 |
|
| 32-15 - Limit (10) | 32-15 Screw, Short, Pan Head
MULTI USE See Description | $0.70 |
|
| 32-500S - Limit (5) | 32-500S Screw, Non-Handle Side Stand Screw
LIMITED QUANTITIES AVAILABLE | $0.85 |
|
| 33-16VS | 33-16VS Iron Alloy Rod Clamp
REPLACES ORIGINAL NUMBER 33-16S ON SOME REELS | $15.75 |
|
| 33-113 | 33-113 Clamp, Rod, Graphite (Original with no ring)
REPLACED BY PART NUMBER 33N-113
LIMITED QUANTITIES AVAILABLE
| $6.00 |
|
| 33N-113 | 33N-113 Clamp, Rod: Graphite, with Side Ring
REPLACES ORIGINAL NUMBER 33-113 ON SOME REELS | $4.20 |
|
| 33-200 | 33-200 Rod Clamp (Metal)
| $4.10 |
|
| 33R-200 | 33R-200 Clamp, Rod, Metal, Ringed (Optional)
| $6.85 |
|
| 33C-113 | 33C-113 Rod Clamp KIT: Graphite Clamp with Side Ring, Studs, Nuts, Wrench
| $9.90 |
|
| 33i-113SP | 33i-113SP Clamp, Rod, KIT: Iron Alloy Clamp Kit (Optional)
| $24.15 |
|
| 33N-113SP | 33N-113SP Clamp, Rod, KIT: Graphite Clamp with Studs and Nuts
| $10.50 |
|
| 34-45 | 34-45 Screw, Clamp Screw ONLY
| $1.05 |
|
| 34C-45 | 34C-45 Screw With Nuts, for Rod Clamp ( uses 2 )
| $4.20 |
|
| 35-60 | 35-60 Tongue, Click Tongue
| $1.35 |
|
| 36-60CH | 36-60CH Button, Click Button
| $1.35 |
|
| 37-155 - Limit (10) | 37-155 Post, Frame Post
| $4.00 |
|
| 37A-500S | 37A-500s Spacer Bar
REPLACED BY PART NUMBER 37-155 | $11.85 |
|
| 38-8 | 38-8 Screw
MULTI USE See Description
| $0.80 |
|
| 40-60 | 40-60 Bearing, Non-Handle Side
MULTI USE See DescriptionREPLACES ORIGINAL NUMBER 40-85 ON SOME REELS | $3.95 |
|
| 41-60 | 41-60 Spring
MULTI USE See Description | $0.95 |
|
| 46A-704 | 46A-704 Screw (Pan Head)
MULTI USE See Description | $0.55 |
|
| 62-309 | 62-309 Spring, Click Spring, Metal
MULTI USE See Description | $2.40 |
|
| 86-500 | 86-500 Washer, Drag, Metal, Round Keyed Metal Drag Washer
| $1.05 |
|
| 98-60 | 98-60 Sleeve, Gear Sleeve (comes with pin) COARSE Tooth
MULTI USE See Description | $4.65 |
|
| 98-60AT | 98-60AT Sleeve, Gear Sleeve (comes with pin) COARSE Tooth (Stainless) (Optional)
Aftermarket Part - Not Manufactured by Penn
MULTI USE See Description | $21.00 |
|
| 98-505 | 98-505 Gear Sleeve (comes with pin) (FINE TOOTH)
| $8.55 |
|
| 98-505AT | 98-505AT Sleeve, Gear Sleeve (comes with pin) FINE Tooth (Stainless) (Optional)
Aftermarket Part - Not Manufactured by Penn | $25.00 |
|
| 110-60 | 110-60 Screw, Handle Lock Screw
REPLACES ORIGINAL PART NUMBER 23A-60 ON SOME REELS | $0.55 |
|
| 129-200 | 129-200 Take Apart Thumb Screw (Complete)
| $5.55 |
|
| 130-200 - Not Available | 130-200 Thumb Screw Bushing
| |
|
| 131-200 - Limit (5) | 131-200 Spring, Thumb Screw Spring
LIMITED QUANTITIES AVAILABLE | $0.70 |
|
| 132-200 | 132-200 Brass Ring Nut
| $0.55 |
|
| 149-45 | 149-45 Nut, Clamp, Long, for thick clamps (uses 2)
Used with the graphite clamps 33-114H2, 33-340, 33N-113 and the iron alloy clamp 33i-113 | $1.05 |
|
| 149-200 | 149-200 Nut, Clamp, Hex (uses 2)
| $0.55 |
|
| 152-200 | 152-200 Wing Nut, f/Thin Metal Rod Clamp Only (uses 2)
| $0.70 |
|
| 168-60 | 168-60 Wrench
Fits 23-60, 23-16S handle nuts (See details for list of reels)  | $0.70 |
|
| 102-113 | 102-113 Pin, Gear Sleeve Pin ONLY
| $0.55 |
|
| Misc. - Limit (5) | 168-9 Wrench
Fits 23-60 handle nut (see details for list of reels)  REPLACED BY PART NUMBER 168-60 or 168-TANI
| $1.15 |
|